<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE Articles SYSTEM "HBI_DTD">
<Articles><Article><Journal><PublisherName></PublisherName><JournalTitle>Journal of Environmental Health Science &amp; Engineering</JournalTitle><Volume>8</Volume><Issue>2</Issue></Journal><ArticleTitle>INTERACTION OF ACRYLONITRILE VAPORS ON A BENCH SCALE BIOFILTER TREATING STYRENE-POLLUTED WASTE GAS STREAMS</ArticleTitle><FirstPage>127</FirstPage><LastPage>132</LastPage><AuthorList><Author><FirstName>R.</FirstName><LastName>Dehghanzadeh</LastName></Author><Author><FirstName>H.</FirstName><LastName>Aslani</LastName></Author><Author><FirstName>A.</FirstName><LastName>Torkian</LastName></Author><Author><FirstName>M.</FirstName><LastName>Asadi</LastName></Author></AuthorList><History><PubDate PubStatus="received"><Year>2015</Year><Month>12</Month><Day>09</Day></PubDate></History><Abstract>Considering concurrent use of styrene and acrylonitrile as raw 
materials in the production of synthetic resins and plastic and their 
associated differences in physiochemical properties and 
biodegradability, our experiments were conducted in a three-stage 
downflow bench-scale biofilter to study the potential suppressive 
effects of acrylonitrile on styrene removal. A Mixture of yard waste 
compost and shredded plastics and activated sludge was used as bed 
media. Gas phase concentration of styrene and acrylonitrile was 
determined via gas chromatographic analysis. Under steady-state 
conditions, maximum elimination capacity of styrene and acrylonitrile 
was 44 and 120 g/m3 h, respectively. The effect of moisture was very 
significant in reducing the specific adsorptive capacity (&amp;mu;g/g of bed 
media) of styrene and acrylonitrile. The bed media with 60% moisture 
content lost styrene absorption capacities by more than one order of 
magnitude when compared to dry media. The existence of water increased 
the absorption capacity of medium for acrylonitrile about 95%. Styrene 
elimination capacity of the biofilter during co-treatment was less as 
compared to pure styrene biodegradation indicating the likelihood of 
inhibitory kinetics. Introduction of acrylonitrile into the air stream 
reduced elimination capacity of styrene to 103 g/m3 h. The adverse 
impact on removal rate of acrylonitrile due to the presence of styrene 
in the gas stream was minimal. Carbon-equivalent removal for the system 
amounted to about 85 g C/m3 h at empty bed retention time of 120 s.</Abstract><web_url>https://ijehse.tums.ac.ir/index.php/jehse/article/view/295</web_url><pdf_url>https://ijehse.tums.ac.ir/index.php/jehse/article/download/295/294</pdf_url></Article></Articles>
